Seven Cycles 622 slx, Part II
To read part one, click here.
So let’s talk ride quality. I’ll be blunt—I haven’t ridden another bike that offered as vibration-free a ride while maintaining a lively, responsive nature. I’ve ridden bikes that were stiffer in overall torsion. I’ve ridden bikes that were stiffer at the bottom bracket, too. But of all the bikes I’ve ridden that were meant to put a pillow over the face of vibration, none did so as effectively as the 622 slx. The closest was the Serotta Ottrot, and while I loved how that bike handled, it wasn’t exactly light and it lacked a certain lively feel on the road that the 622 slx possesses. That’s also a quality of geometry and can be part of the flip side of a bike that descends like water poured from a pitcher.
Allow me a slight restatement of that last idea. The last time I rode a bike that possessed as quiet a ride as the 622 slx, I was on a carbon fiber bike that didn’t particularly impress me. While it could turn a fair road into smooth pavement and a good road into a marble floor, those bikes (I’m not singling out any one manufacturer because there are so many of that ilk out there) lacked the stiff, responsive ride of something like the Specialized S-Works Tarmac SL4. The 622 slx is unusual because it combines great stiffness—stiffer than most carbon bikes on the market as recently as 2005, though not as stiff as some current offerings like the Cervelo R5 VWD or Specialized S-Works Tarmac SL4—with a ride quieter than even the new S-Works Roubaix SL4.
Let me add that while the Serotta Ottrot is a fine example of a bike that mixes titanium and carbon fiber, it is by no means the only bike that does it. Sampson has offered one; it had most of the ride quality of the Ottrot at something like 60 percent of the cost. There have been other examples—especially Seven’s own Elium—but outside of Seven and Serotta no one has done a bike with as attractive a mix of ride characteristics.
I’ve made it clear previously that my favorite bikes send a fair amount of vibration through to the rider. Now it’s true that the amount of vibration that any bike delivers to the ride can be influenced by a number of factors; that’s a detail I’m aware of and do what I can to mitigate. I use the same bar tape on all the bikes I review. I will run a couple of sets of wheels I’m very familiar with on the bikes. Those wheels feature the same tires pumped up to the same pressure. The point is to zero out as many variables as possible, so that if a bike seems to be sending less vibration to my hands and butt, it’s not just a matter of needing to pump the tires up another 20 psi.
So while I’m a fan of bikes that deliver as much high-frequency vibration as possible to the rider, I have to admit that the feel of the 622 slx was something I quickly came to appreciate. Imagine driving a Ferrari for your daily commute, then you go on a weekend jaunt to Yosemite in a big Lexus sedan. The ride is ice-cream smooth, quieter than a field of wheat on a windless night, and more comfortable than your mother’s arms. It’s the sort of experience that could make anyone rethink the attraction of a sport-tuned suspension.
I have friends for whom vibration is a real issue, that it causes nerve impingement. I see them on rides sitting up to shake their hands in an attempt to restore feeling and bloodflow to their deadened mitts. For anyone who faces issues with nerve impingement and numbness, whether it be in their hands, shoulders or back, reducing vibration can increase not just enjoyment, but the number of miles someone can ride without feeling the discomfort of numbness.
When considered against bikes like Time’s VRS Vibraser or the Specialized Roubaix, the 622 slx does more to reduce vibration and insulate the rider from rough roads. Of course, that shouldn’t be the only reason someone chooses a bike, but let’s be honest—we are all aging. Every one of us. And while vibration may not be an issue for you today, it’s fair to harbor some concern that being rattled like a paint can for a dozen hours each week will result in some sensitivity as you pass your fifth decade.
Another factor contributing to the 622 slx’s comfort was the fact that this isn’t an über-stiff bike. In plain terms, this isn’t a race bike. It reminded me of the Kestrel that I rode for an afternoon at last year’s Interbike. That bike was designed to be enjoyable, not adrenal. There was no mistaking that when considered against the other two road bikes I was riding at the time, the Felt F1 and the Specialized S-Works Tarmac SL4, the 622 slx simply wasn’t as lethal. Sure, it was sharp in its handling like any great road bike ought to be, but this was paring knife-sharp, not scalpel sharp. So what’s that in an absolute sense? Here are the specs from Seven:
- Seat tube length: 50.0cm
- Top tube length: 58.1cm
- Head tube angle: 73.5˚
- Seat tube angle: 73˚
- BB drop: 7.0cm
- Chainstay length: 40.5cm
- Top tube slope: 8˚
- Front center: 59.7cm
- Head tube length: 16.8cm
- Head tube diameter: 1.125″
Seven allows customers to choose four different parameters of ride quality as they go through the purchase. They are all specified on a 10-point scale.
- Handling: 6 (1 is stable; 10 is agile)
- Drivetrain rigidity: 7 (1 is lightweight; 10 is stiff)
- Vertical compliance: 3 (1 is comfortable; 10 is stiff)
- Weight-to-performance: 8 (1 is lightweight; 10 is responsive)
When I went through the custom process back in ’97, there were only two scales to choose from—handling and stiffness/weight. Seven has a much improved ability to control for these different variables now. What is perhaps most impressive in these numbers is that they were able to achieve such high numbers for drivetrain rigidity and weight-to-performance while keeping the bike remarkably vertically compliant.
Perhaps the most remarkable detail I haven’t revealed about this bike so far is that it wasn’t custom. Though the fit was remarkably good, this bike came from a demo fleet. They shipped the frame and fork to Shimano for my review of the Dura-Ace 9000 group. It was assembled by one of Shimano’s techs. Incidentally, after our tech presentation and initial ride on the 9000-equipped bikes, I had a chance to speak with the tech who assembled my bike. Actually, he approached me. He wanted to make clear to me that of all the bikes that they assembled for this shindig, the Seven was the easiest to install the group on, the most fun to work on because the cable routing was so straightforward, and all the fittings and threads so perfectly cut.
Even though the folks at Seven expressed a high degree of desire to take me through the custom process again, I sold them on the idea of letting me do a “stock” bike. If after my review hit they didn’t think they’d gotten the high marks they hoped for, I said we could then do a custom bike. So why do this? I wanted a chance to ride a bike that was meant to be emblematic of the ride Seven wants to sell. I don’t know if they would necessarily call this bike emblematic, but because it was built as an example of their work meant to woo a prospective customer, this bike must possess many of the qualities Seven thinks are among its most winning. Sure, they can build a lighter bike or a stiffer bike or a pig that can carry panniers, but this bike is meant to be nothing so much as a good time.
And I can say it is. Once you’ve let go of being the fastest guy (or gal), or having the ultimate climbing bike or whatever, and you just focus on the qualities that will make a bike enjoyable on group rides, on solo rides, at long gran fondos and short recovery rides, this bike does it all very well. It was yet another occasion of packing a bike in a box only under duress. I’d have continued to ride it regularly.
Here’s the thing I keep thinking about when I contemplate reviewing a custom Seven: I don’t think I would have requested this bike and in that you, the readers, would have been cheated. Sure, the dimensions in the wake of my fitting last winter would be different, but I’m talking about issues larger than just fit. The fit on this bike was perfectly workable. I probably would have requested a bike that was a 7 or 8 in handling. I would have asked for an 8 or 9 on drivetrain rigidity. I’m not sure I’d have had the presence of mind to request the maximum in vertical compliance relative to the drivetrain rigidity I requested. And for weight to performance, that’s the one number that is probably close to what I would have requested.
To me, the point of going with a demo bike was to learn more about what Seven thinks is a good time, not what I think is a good time. It was a chance to gain more insight into what Seven hopes to deliver to customers. Granted, their bread and butter is custom work, but once you’ve built tens of thousands of road bikes, you come to some conclusions and they are reflected in this bike. When you’re not driven by making a race bike, you’re suddenly free to make something that places enjoyment ahead of performance.
There ought to be more bikes made with that priority.